Back to
support
1.) Enter Password for modem. 
2.) Then the modem will try to configure itself automatically.
Once the auto configuration is done then click on the link to double
check your ATM configuration. 
3.) Click on Expert Mode. 
4.) Click the OK button. 
5.) Click on Configure. 
6.) Click on WAN. 
7.) Uncheck Enable Gateway Option and click on ATM. 
8.) Enter in the following settings and click submit. Then click
on WAN. 
11.) Click on LAN.
11.) Uncheck LAN IP Interface (Ethernet 100BT) and click Submit.
Then click Configure. 
11.) Click on Advanced.
11.) Click on DHCP Server. 
11.) Enter in the following settings and click submit. Then click
on the ! in the upper right corner. 
13.) Click on Save and Restart. Allow the modem to restart and
once the sync light is solid try to connect to the internet. 
|